Shed Homes

Shed Home Kits

A shed home kit from Shedz is an engineered steel-framed building package — the structural bones of a livable shed home. You get the portal frame, the cladding, and the engineering. What you do with the inside is up to you and your builder.

What’s Included in Your Kit

• Full portal frame steel structure — engineered to suit your site, span, and wind region
• COLORBOND® steel roofing and wall cladding — 22 colours available
• Structural engineering certification — stamped drawings for your specific build
• All primary and secondary steelwork — columns, rafters, purlins, girts, bracing
• Fasteners and flashings — everything needed to close the shell
• Roller doors, PA doors, and windows — as per your selected configuration
• Delivery to site — anywhere in Australia, including regional and rural areas

What’s Not Included

Shedz kits are the structural shell only. The following are not part of the standard kit:

• Concrete slab or footings
• Internal fit-out — framing, plasterboard, insulation
• Plumbing, electrical, or gas
• Architectural or floor plans
• Council submission documents (DA/BA applications)
• Energy efficiency reports (NatHERS / Section J)
• BAL (Bushfire Attack Level) assessments
• NCC compliance documentation

Available Extras

We can add the following to your kit on request:

• Insulation — wall and roof blanket insulation packages
• Mezzanine framing — structural steel for upper-level floors
• Extra openings — additional roller doors, PA doors, or window positions
• Skylights — natural light options for your build
• Ventilation — whirlybirds and ridge ventilation
• Awnings and canopies — extended roof lines for covered outdoor areas

How It Works

1. Design your shed — use our 3D Designer to configure your dimensions, doors, and colours
2. Get your quote — we’ll price it based on your site location and wind region
3. Kit manufactured and delivered — typically within 3–6 weeks
4. Build with full visibility — once engineered, you receive a link to your project with full online access. Every component is mapped — searchable by part number from the Bill of Materials, right down to every screw, bolt, and bracket. Your shed builder or owner builder knows exactly where each piece goes, not just from engineering drawings, but from a complete interactive parts list

Looking for a Complete, Build-Ready Package?

If you want more than the structural kit — including architectural plans, energy compliance reports, council submission documentation, and full NCC compliance — our sister brand Shed Homes delivers a complete build-ready package. Everything your builder and your council need, all in one kit.

Visit Shed Homes →

Explore Our Full Range

All Sheds · Residential Sheds · Farm Sheds · Commercial Sheds · Industrial Sheds · Equine Sheds · Hay Sheds · Machinery Sheds · Cyclone Rated Sheds

Not sure which shed is right for you? Contact us or try our 3D Designer to get started.

See Every Component in 3D — Before It Arrives on Site

When you order a shed home kit from Shedz, you get full interactive 3D access to your exact build. Not just drawings — a living 3D model you can explore, rotate, and interrogate.

Your shed home, fully rendered. Toggle layers to strip back cladding and see the structural steel beneath.

Every dimension in millimetres — spans, heights, openings, awning widths. Your slab contractor knows exactly what to pour.

Click any connection — bracket type, bolt grade, quantity. Haunch Bracket C200 with 10x M16 Grade 8.8 bolts. No guesswork.

Search by mark number — type “AP1” and all 7 Apex Plates light up on the model. Every part, located instantly.

This is what “build-ready” means at Shedz. A fully interactive BOM where every member, bracket, flashing, and bolt is identified, dimensioned, and searchable. Your builder can walk through the entire structure on screen before a single footing goes in.